| Model Specification |
T-60A | T-60B |
T-60C
|
||||||
|
CH1
|
CH2
|
CH3
|
CH1
|
CH2
|
CH3
|
CH1
|
CH2
|
CH3
|
|
| DC output voltage |
5V
|
12V |
-5V
|
5V
|
12V
|
-12V |
5V
|
15V
|
-15V |
| Output voltage error
(Note:2) |
±2% |
±6%
|
±6%
|
±2% |
±6%
|
±6%
|
±2% |
±6%
|
±6% |
| Rated output current | 5A |
2.5A
|
0.5A | 5A | 2.5A |
0.5A
|
5A | 2.5A |
0.5A
|
| Output current rage | 0.5-7A |
0.2-3.5A
|
0-0.1A
|
0.5-7A |
0.2-3.5A
|
0-0.1A
|
0.5-7A |
0.2-3.5A
|
0-0.1A
|
| Wave and noise(Note ：3） |
100mVp-p
|
100mVp-p
|
100mVp-p
|
100mVp-p
|
100mVp-p |
100mVp-p
|
100mVp-p
|
100mVp-p
|
100mVp-p
|
| Inlet stability(Note ：4） |
±0.5%
|
±1%
|
±0.5%
|
±0.5%
|
±1% |
±0.5%
|
±0.5% |
±1%
|
±0.5% |
| DC output power |
57.5W
|
61W
|
62.5W
|
||||||
| Efficiency |
72%
|
72%
|
72%
|
||||||
| Adjustable range for DC voltage |
CH1;+10,-5%
|
CH1:+10,-5%
|
CH1:+10,-5%
|
||||||
| AC input voltage range | 85-264VAC 47-63Hz；120-370VDC | ||||||||
| Input current | 2A/115V 1A/230A | ||||||||
| AC INnrush current | Cold-start current 30A/115V 60A/230V | ||||||||
| Leakage current | <1mA/240VAC | ||||||||
| Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | ||||||||
| Over-voltage protection | CH1:5.75-6.75V | ||||||||
| High-temperature protection | ………… | ||||||||
| Temperature coefficient | ±0.03%/℃（0-50℃）ON+5V | ||||||||
| Setup rise hold up time | 800ms,50ms,10ms/115VAC 300ms.50ms,80ms/230VAC | ||||||||
| Vibration | 10-500Hz,2G 10min,/1cycle，Period for60min，Each axes | ||||||||
| Withstand voltage | Input and output internal：1.5KVAC,Input and enclosure：1.5KVAC,Output and enclosure：0.5KVAC | ||||||||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure：500VDC/100MΩ | ||||||||
| Working temperature and humidity | -10℃~+60℃（Refer to output derating curve），20%~90%RH | ||||||||
| Store temperature and humidity | -20℃~+85℃。10%~95%RH | ||||||||
| Overall dimension | 159×97×38mm | ||||||||
| Weight | 0.56Kgs | ||||||||
| Safety standards | UL 1012 TUV EN60950(IEC950,UL1950) | ||||||||
| EMC standards | CISPR22(EN55022),class B,IEC801-2,-3,-4,IEC555-2 Verification | ||||||||
| Note： 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting “A12″double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.Total output canbe maximum Current,total load can not exceed the maximum output power. 7.C23must be knocked down. |
|||||||||
T-60 Triple output 12v SMPS power supply
T-60 Triple output switching power supply Low price and high reliability
105℃ output capacitor AC input power suitable for the world Hight efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With Short-circuit and owwerload protection Compact size,light weight 100% full-load burning test Installed with EMI filter,minimum wave
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
