| Model Specification |
T-30A
|
T-30B
|
||||
|
CH1
|
CH2
|
CH3
|
CH1
|
CH2
|
CH3
|
|
| DC output voltage |
5V
|
12V
|
-5V
|
5V
|
24V
|
-12V
|
| Output voltage error（Note：2） | ±2% |
+2,-6%
|
+2,-10%
|
±2%
|
+2,-10%
|
±6%
|
| Rated output current | 3A |
1A
|
0.5A
|
3A
|
1A
|
0.5A
|
| Output current rage | 0.5-3A |
0.1-1A
|
0.1-0.5A
|
0.5-3A
|
0.1-1A
|
0.1-0.5A
|
| Wave and noise(Note ：3） |
50mVp-p
|
100mVp-p
|
50mVp-p
|
50mVp-p
|
100mVp-p
|
100mVp-p
|
| Inlet stability(Note ：4） |
±0.5%
|
±1%
|
±1%
|
±0.5%
|
±1%
|
±1%
|
| Load stablity (Note ：5） |
±0.5%
|
±5%
|
±5%
|
±0.5%
|
±5%
|
±5%
|
| DC output power |
30W
|
33W
|
||||
| Efficiency |
70%
|
72%
|
||||
| Adjustable range for DC voltage |
CH1;+10,-5%
|
CH1:+10,-5%
|
||||
| AC input voltage range | 85-132VAC/170-264VAC selected by switch 47-63Hz；240-370VDC | |||||
| Input current | 0.8A/115V 0.45A/230A | |||||
| AC INnrush current | Cold-start current35A | |||||
| Leakage current | <0.5mA/240VAC | |||||
| Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||
| Over-voltage protection | ………… | |||||
| High-temperature protection | ………… | |||||
| Temperature coefficient | ±0.03%/℃（0-50℃） | |||||
| Setup rise hold up time | 200ms,100ms,30ms | |||||
| Vibration | 10-500Hz,2G 10min,/1cycle，Period for60min，Each axes | |||||
| Withstand voltage | Input and output internal：1.5KVAC,Input and enclosure：1.5KVAC,Output and enclosure：0.5KVAC | |||||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure：500VDC/100MΩ | |||||
| Working temperature and humidity | -10℃~+60℃（Refer to output derating curve），20%~90%RH | |||||
| Store temperature and humidity | -20℃~+85℃。10%~95%RH | |||||
| Overall dimension | 129×98×38mm | |||||
| Weight | 0.4Kgs | |||||
| Safety standards | Meet UL 1012R requirement (Not apply for the mark) | |||||
| EMC standards | Meet FCC Part15 J Conduction class A | |||||
| Note： 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting “A12″double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. |
||||||
T-30 Triple output switching power supply
T-30 Triple output switching power supply Low price and high reliability 105℃ output capacitor AC input power suitable for the world Hight efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With Short-circuit and owwerload protection Compact size,light weight 100% full-load burning test Installed with EMI filter,minimum wave
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
