| Model Specification |
T-120A
|
T-120B
|
T-120C
|
T-120D
|
||||||||
|
CH1
|
CH2
|
CH3
|
CH1
|
CH2
|
CH3
|
CH1
|
CH2
|
CH3
|
CH1
|
CH2
|
CH3
|
|
| DC output voltage |
5V
|
12V
|
-5V
|
5V
|
12V
|
-12V
|
5V
|
15V
|
-15V
|
5V
|
12V
|
24V
|
| Output voltage error（Note：2） | ±2% |
±5%
|
±5%
|
±2% |
±5%
|
±5%
|
±2% |
±5%
|
±5%
|
±2%
|
±6%
|
±6%
|
| Rated output current | 3A |
2A
|
0.5A
|
3A |
2A
|
0.5A
|
3A
|
1.5A
|
0.5A
|
3A
|
1.5A
|
0.5A
|
| Output current rage | 0.6-7A |
0.2-1A
|
0.2-1A
|
0.6-5A |
0.2-1A
|
0.2-1A
|
0.6-4A
|
0.2-1A
|
0.2-1A
|
0.6-4A
|
0.2-1.2A
|
0.2-1.2A
|
| Wave and noise(Note ：3） |
100mV
|
100mV
|
100mV
|
100mV
|
100mV
|
100mV
|
100mV
|
100mV
|
100mV
|
100mV
|
100mV
|
100mV
|
| Inlet stability(Note ：4） |
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
±1%
|
| Load stablity (Note ：5） |
±1%
|
±4%
|
±4%
|
±1%
|
±4%
|
±4%
|
±1%
|
±4%
|
±4%
|
±1%
|
±5%
|
±5%
|
| DC output power |
52W
|
49W
|
50W
|
51W
|
||||||||
| Efficiency |
66%
|
69%
|
71%
|
72%
|
||||||||
| Adjustable range for DC voltage |
CH1;+10,-5%
|
CH1:+10,-5%
|
CH1:+10,-5%
|
CH1:+10,-5%
|
||||||||
| AC input voltage range | 85-132VAC/170-264VAC由开关选择 47-63Hz,240-370VDC | |||||||||||
| Input current | 1.6A/115V 0.8A/230A | |||||||||||
| AC INnrush current | Cold-start current 20A/115V 40A/230V | |||||||||||
| Leakage current | <0.5mA/240VAC | |||||||||||
| Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||||||||
| Over-voltage protection | ………… | |||||||||||
| High-temperature protection | ………… | |||||||||||
| Temperature coefficient | ±0.03%/℃（0-50℃）ON+5V | |||||||||||
| Setup rise hold up time | 200ms,50ms,16ms | |||||||||||
| Vibration | 10-500Hz,2G 10min,/1cycle，Period for60min，Each axes | |||||||||||
| Withstand voltage | Input and output internal：1.5KVAC,Input and enclosure：1.5KVAC,Output and enclosure：0.5KVAC | |||||||||||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure：500VDC/100MΩ | |||||||||||
| Working temperature and humidity | -10℃~+60℃（Refer to output derating curve），20%~90%RH | |||||||||||
| Store temperature and humidity | -20℃~+85℃,10%~95%RH | |||||||||||
| Overall dimension | 195×97×38mm | |||||||||||
| Weight | 0.54Kgs | |||||||||||
| Safety standards | Meet UL 1012 requirement(Not apply for the mark) | |||||||||||
| EMC standards | ………… | |||||||||||
| Note： 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting “A12″double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.Total output canbe maximum Current,total load can not exceed the maximum output power |
||||||||||||
T-120 triple output switching power supply
T-120 triple output switching power supply Low price and high reliability 105℃ output capacitor AC input power suitable for the world Hight efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With Short-circuit and owwerload protection Compact size,light weight 100% full-load burning test Installed with EMI filter,minimum wave
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
