| Model | SP-320-3.3 | SP-320-5 | SP-320-7.5 | SP-320-12 | SP-320-13.5 | SP-320-15 | SP-320-24 | SP-320-27 | SP-320-36 | SP-320-48 | |
| Output | DC voltage | 3.3V | 5V | 7.5V | 12V | 13.5V | 15V | 24V | 27V | 36V | 48V |
| Voltage tolerance | ±1% | ±2% | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Rated current | 60A | 55A | 40A | 25A | 22A | 20A | 13A | 11.7A | 8.8A | 6.7A | |
| Current range | 0-60A | 0-55A | 0-40A | 0-25A | 0-22A | 0-20A | 0-13A | 0-11.7A | 0-8.8A | 0-6.7A | |
| Rated power | 320W | 320W | 320W | 320W | 320W | 320W | 320W | 320W | 320W | 320W | |
| Ripple&noise | 150mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | 200mvp-p | 220mvp-p | 240mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | -9%~+10% | -9%~+10% | -9%~+10% | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% | |
| Input | Voltage range | 90~264VAC，120~373VDC | |||||||||
| frequency | 47~63HZ | ||||||||||
| AC current | 1.6A/115VAC，0.8A/230VAC | ||||||||||
| efficiency | 65% | 71% | 76% | 79% | 80% | 81% | 83% | 83% | 84% | ||
| Inrush current | Cold start current 20A/115VAC，40A/230VAC | ||||||||||
| Leakage current | < 3.5mA/240VAC | ||||||||||
| Protection | overload | Rated output power115%~150% start over load protection | |||||||||
| Protection type：cutoff output，auto recovery after fault condition is removed | |||||||||||
| Protection type：hiccup mode，auto-recovery after fault condition is removed | |||||||||||
| Environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | |||||||||
| Storagetemp,humidity | -20℃~+85℃，10%~95%RH non-condensing | ||||||||||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes | ||||||||||
| Safety | Withstand voltage | I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC | |||||||||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC | ||||||||||
| Fitstandard | Safety standard | Fit UL1012 | |||||||||
| EMC standard | EN55022，CLASSA | ||||||||||
| Others | Dimension | 210*115*50mm (L*W*H) | |||||||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | ||||||||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||||||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||||||||||
