SP-200 200W pfc power supply for VCR

Model		SP-200-5	SP-200-12	SP-200-24	SP-200-48
Output	DC voltage	5V	12V	24V	48V
	Voltage tolerance	±2%	±2%	±1%	±1%
	Rated current	40A	16.7A	8.4A	4.2A
	Current range	0-40A	0-16.7A	0-8.4A	0-4.2A
	Rated power	200W	200W	200W	200W
	Ripple&noise	100mvp-p	100mvp-p	150mvp-p	2000mvp-p
	DCvoltage ADJ.range	-9%~+10%	-9%~+10%	±10%	±10%
Input	Voltage range	90~264VAC,120~373VDC
	frequency	47~63HZ
	AC current	1.6A/115VAC,0.8A/230VAC
	efficiency	71%	79%	83%	84%
	Inrush current	Cold start current 20A/115VAC,40A/230VAC
	Leakage current	< 3.5mA/240VAC
Protection	overload	Rated output power115%~150% start over load protection
		Protection type:cutoff output,auto recovery after fault condition is removed
		Protection type:hiccup mode,auto-recovery after fault condition is removed
Environment	Working temp,humidity	-10℃~+60℃,20%~90%RH
	Storagetemp,humidity	-20℃~+85℃,10%~95%RH non-condensing
	Withstand vibration	10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes
Safety	Withstand voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
Fit standard	Safety standard	Fit UL1012
	EMC standard	EN55022,CLASSA
Others	Dimension	1999950mm (LWH)
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
	3. Tolerance : includes set up tolerance, line regulation and load regulation.