| Model | SP-150-5 | SP-150-7.5 | SP-150-12 | SP-150-13.5 | SP-150-15 | SP-150-24 | SP-150-27 | SP-150-48 | |
| Output | DC voltage | 5V | 7.5V | 12V | 13.5 | 15V | 24V | 27V | 48V |
| Voltage tolerance | ±2% | ±2% | ±2% | ±2% | ±2% | ±1% | ±1% | ±1% | |
| Rated current | 30A | 20A | 12.5A | 11.2A | 10A | 6.3A | 5.6A | 3.2A | |
| Current range | 0~30A | 0-20A | 0~12.5A | 0-11.2A | 0~10A | 0~6.3A | 0~5.6A | 0~3.2A | |
| Rated power | 150W | 150W | 150W | 150W | 150W | 150W | 150W | 150W | |
| Ripple&noise | 100mvp-p | 100mvp-p | 100mvp-p | 100mvp-p | 100mvp-p | 150mvp-p | 150mvp-p | 150mvp-p | |
| DC voltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% | ±10% | ±10% | |
| Input | Voltage range | 90~264VAC，120~373VDC | |||||||
| frequency | 47~63HZ | ||||||||
| AC current | 0.93A/115VAC，0.93A/230VAC | ||||||||
| efficiency | 75% | 79% | 80% | 80% | 81% | 83% | 84% | 84% | |
| Inrush current | Cold start current 20A/115VAC，40A/230VAC | ||||||||
| Leakage current | < 3.5mA/240VAC | ||||||||
| Protection | overload | Rated output power115%~150% start over load protection | |||||||
| Protection type：cutoff output，auto recovery after fault condition is removed | |||||||||
| Over voltage | |||||||||
| Protection type：hiccup mode，auto-recovery after fault condition is removed | |||||||||
| —– | —– | ||||||||
| —– | |||||||||
| Environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | |||||||
| Storagetemp,humidity | -20℃~+85℃，10%~95%RH non-condensing | ||||||||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes | ||||||||
| Safety | Withstand voltage | I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC | |||||||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC | ||||||||
| Fitstandard | Safety standard | Fit UL1012 | |||||||
| EMC standard | EN55022，CLASSA | ||||||||
| Others | Dimension | 199*99*50mm (L*W*H) | |||||||
| Weight/packing | 0.7kg/30pcs/24kg/0.034 m⊃3;/1.20CUFT | ||||||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | ||||||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||||||||
