| Model | SC-60-12 | SC-60-24 | |||
|
Output |
DC voltage | CH1:13.8V | CH1:13.4V | CH1:27.6V | CH2:26.5V |
| Voltage tolerance | ±1% | —– | ±1% | —– | |
| Rated current | 4.0A | 0.35A | 2.0A | 0.25A | |
| Current range | 0~4A | —– | 0~2A | —– | |
| Rated power | 59.9W | 61.8W | |||
| Ripple&noise | 100mvp-p | —– | 100mvp-p | —– | |
| DCvoltage ADJ.range | CH1:11.3~14.9V | CH1:21.3~29.8V | |||
|
Input |
Voltage range | 90~264VAC, 127~370VDC | |||
| frequency | 47~63HZ | ||||
| AC current | 1.6A/115VAC, 0.8A/230VAC | ||||
| Efficiency | 81% | 83% | |||
| Inrush current | Cold start current 25A/115VAC,45A/230VAC | ||||
| Leakage current | < 1mA/240VAC | ||||
|
Protection |
Over load | Rated output power110%~150% start over load protection | |||
| Protection mode: AC charging mode: hiccup mode auto-recovery after fault condition is removed | |||||
| Battery protection
At low voltage |
9.5~11V | 20~22V | |||
| Protection mode: cut off the output | |||||
| Function | UPS introduction | long-term online floating charge to battery, high charging efficiency,battery can saturate to more than 90% ,cauto-stop harging when it’s full,prevent over charging. Effectively extend battery life,AC/battery auto switch,no switch time,no need human guard, cold-start ,when there is no AC input ,can use battery start UPS, Meet the user’s emergency needs | |||
| Environment | Working temp,humidity | -10°C~+60°C,20%~90%RH | |||
| Storagetemp,humidity | -20°C~+85°C,10%~95%RH non-condensing | ||||
| Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes | ||||
| Safety | Withstand voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||
| Others | Dimension | 129*98*38mm(L*W*H) | |||
| Weight/packing | 0.52kg/45pcs/24kg/0.034m⊃3;/1.2CUFT | ||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25°Cof ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
||||
