| Model | S-75-5 | S-75-12 | S-75-15 | S-75-24 |
| Specification | ||||
| DC output voltage | 5V | 12V | 15V | 24V |
| Output voltage range (Note:2) | ±2% | ±1% | ±1% | ±1% |
| Rated output current | 12A | 6A | 5A | 3.2A |
| Output current range | 0-12A | 0-6A | 0-5A | 0-3.2A |
| Wave and noise(note:3) | 75mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
| Inlet stability(note:4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability(note:5) | ±1% | ±0.5% | ±0.5% | ±0.5% |
| DC output power | 60W | 75W | 75W | 76.8W |
| Efficiency(Typ.) | 71% | 78% | 78% | 82% |
| Adjustable range for DC voltage | +10,-5% | ±10% | ±10% | ±10% |
| AC input voltage range | 85~264VAC 47~63Hz;120~370VDC | |||
| Input current | 1.6A/115V 0.8A/230V | |||
| AC Inrush current | Cold-start current 18A/115V 36A/230V | |||
| Leakage current | ﹤3.5 mA/240VAC | |||
| Overload | 105%~150% Type:pulsing hiccup shutdown Reset:auto recovery | |||
| Over-voltage protection | 105%-135% | |||
| High-voltage protection | …… | |||
| Temp coefficient | ±0.03%/℃(0-50℃) | |||
| Setup, rise, hold up time | 200ms,100ms,30ms at full load | |||
| Vibration | 10~500Hz,2G 10min,/1cycle,Period for 60min,Each axes | |||
| Withstand voltage | Input and output intemal: 1.5KvAC,Input and enclosure: 1.5KvAC Output and enclosure: 0.5KvAC | |||
| Isolation resistance | Input and output intemal, Input and enclosure, Output and enclosure: 500VDC/100MΩ | |||
| Working temp., humidity | -10℃~+60℃(Refer to output derating curve),20%~90%RH | |||
| Storage temp., humidity | -20℃~+85℃.10%~95%RH | |||
| Dimension | 157×97×38mm(L*W*H) | |||
| Weight | 0.5Kgs | |||
| Safety standards | Meet UL 1012 requirement(Not apply for the mark) | |||
| EMC standards | Meet FCC PART 15J Conduction class B | |||
| Note:1.The testing condition for the paramenter above is: 230 VAC input, rated load, 25 ℃ 70% Rh, temperature. | ||||
| 2.Error.include the setting error.line stability and load stability.(Note:5) | ||||
| 3.Wave test:adopting “A12”double wire for 20MHz，and 0.1UF&0.47UF capacitor short-circuit for interrupting | ||||
| 4.Intel voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. | ||||
| 5.Load stability test:The load is from 0% to 100%. | ||||
S-75 Single output switching power supply
S-75 Single output switching power supply Low price and high reliability 105℃ output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With short -circuit and overload protection Compact size, light weight 100% full-load buming test Installed with EMI filter,minimum wave
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
