| Model | S-60-5 | S-60-12 | S-60-15 | S-60-24 |
|---|---|---|---|---|
| Specification | ||||
| DC output voltage |
5V
|
12V
|
15V
|
24V
|
| Output voltage error(Note:2) |
±2%
|
±1%
|
±1%
|
±1%
|
| Rated output current |
12A
|
5A
|
4A
|
2.5A
|
| Output current rage |
0-12A
|
0-5A
|
0-4A
|
0-2.5A
|
| Wave and noise(Note:3) |
120mVp-p
|
120mVp-p
|
150mVp-p
|
150mVp-p
|
| Inlet stability(Note:4) |
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
| Load stablity (Note:5) |
±1%
|
±0.5%
|
±0.5%
|
±0.5%
|
| DC output power |
60W
|
60W
|
60W
|
40W
|
| Efficiency |
72%
|
76%
|
77%
|
79%
|
| Adjustable range for DC voltage |
+10,-5%
|
+10%
|
+10%
|
+10%
|
| AC input voltage range | 85-264VAC 47-63Hz；120-370VDC | |||
| Input current | 2A/115V 60A/230V | |||
| AC INnrush current | Cold-start current 30A/115V 60A/230V | |||
| Leakage current | <3.5mA/240VAC | |||
| Overload proctection | 105%~150% Tpye:pulsing hiccp shutdown Reset:auto recovery | |||
| Over-voltage protection | 115%~135% | |||
| High-temperature protection | ………… | |||
| Temperature coefficient | ±0.03%/℃(0~50%) | |||
| Setup rise hold up time | 100%ms,50ms,10ms/115V 300ms,50ms,80ms/230VAC | |||
| Vibration | 10-500HZ,2G 10min,/1cycle，Period for 60min，Each axes | |||
| Withstand voltage | Input and output internal：1.5KVAC,Input and enclosure：1.5KVAC,Output and enclosure：0.5KVAC | |||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure：500VDC/100MΩ | |||
| Working temperature and humidity | -10℃~+60℃（Refer to output derating curve），20%~90%RH | |||
| Store temperature and humidity | -20℃~+85℃,10%~95%RH | |||
| Overall dimension | 159×97×38mm | |||
| Weight | 0.55Kgs | |||
| Safety standards | UL1012 TUV EN6050(IEC,UL1950)Approved | |||
| EMC standards | CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||
| Note： 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting “A12″double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.C2、3、6 must be knocked down. |
||||
S-60 Single output swtiching power supply
S-60 Single output swtiching power supply Low price and high reliability 105℃ output capacitor AC input power suitable for the world Hight efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With Short-circuit and owwerload protection Compact size,light weight 100% full-load burning test Installed with EMI filter,minimum wave
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
