| Model Specification |
S-25-5
|
S-25-12
|
S-25-15
|
S-25-24 |
| DC output voltage |
5V
|
12V
|
15V
|
24V
|
| Output voltage error（Note：2） | ±2% |
±1%
|
±1%
|
±1%
|
| Rated output current | 5A |
2.1A
|
1.7A
|
1.1A
|
| Output current rage | 0-5A |
0-2.1A
|
0-1.7A
|
0-1.1A
|
| Wave and noise(Note:3) |
50mVp-p
|
100mVp-p
|
100mVp-p
|
100mVp-p
|
| Inlet stability(Note:4） |
±0.5%
|
±0.5%
|
±0.5%
|
±0.5%
|
| Load stablity (Note:5） |
±1%
|
±0.5%
|
±0.5% |
±0.5% |
| DC output power |
25W
|
25.2W
|
25.5W
|
26.4W
|
| Efficiency |
72%/115VAC
|
76%/115VAC
|
77%/115VAC
|
80%/115VAC
|
| Adjustable range for DC voltage |
+10,-5%
|
+10%
|
+10%
|
+10%
|
| AC input voltage range | 85-264VAC 47~63Hz;120~370VDC | |||
| Input current | 0.6A/115V 0.35A/230A | |||
| AC INnrush current | Cold-start current15A/115V 30A/230V | |||
| Leakage current | <0.75mA/240VAC | |||
| Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||
| Over-voltage protection | 105%-135 | |||
| High-temperature protection | ………… | |||
| Temperature coefficient | ±0.03%/℃（0-50℃） | |||
| Setup rise hold up time | 100%ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC | |||
| Vibration | 10-500Hz,2G 10min,/1cycle，Period for60min，Each axes | |||
| Withstand voltage | Input and output internal：1.5KVAC,Input and enclosure：1.5KVAC,Output and enclosure：0.5KVAC | |||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure：500VDC/100MΩ | |||
| Working temperature and humidity | -10℃~+60℃（Refer to output derating curve），20%~90%RH | |||
| Store temperature and humidity | -20℃~+85℃。10%~95%RH | |||
| Overall dimension | 99×97×35mm | |||
| Weight | 0.3Kgs | |||
| Safety standards | UL1012 TUV EN6050(IEC950,UL1950)Approved | |||
| EMC standards | CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||
| Note： 1.The testing condition for the paramenter above is :230VAC input,rated load,25℃70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting “A12″double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.C6must be knocked down. |
||||
S-25 Enclosed switching power supply
S-25 Enclosed switching power supply Low price and high reliability 105℃ output capacitor AC input power suitable for the world Hight efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With Short-circuit and owwerload protection Compact size,light weight 100% full-load burning test Installed with EMI filter,minimum wave
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
