| Model | MS-50-5 | MS-50-12 | MS-50-15 | MS-50-24 | |
| output | DC voltage | 5V | 12V | 15V | 24V |
| Voltage tolerance | ±2% | ±1% | ±1% | ±1% | |
| Rated current | 7A | 4.2A | 3.4A | 2.1A | |
| Current range | 0~7A | 0~4.2A | 0~3.4A | 0~2.1A | |
| Rated power | 35W | 50.4W | 51W | 50.4W | |
| Ripple&noise | 80mvp-p | 120mvp-p | 120mvp-p | 120mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | |
| input | Voltage range | 90~132VAC/170~264VAC(selected by switch)，235~373VDC | |||
| frequency | 47~63HZ | ||||
| AC current | 1.3A/115VAC，0.65A/230VAC | ||||
| efficiency | 80% | 82% | 82% | 84% | |
| Inrush current | Cold start current 18A/115VAC，36A/230VAC | ||||
| Leakage current | < 1mA/240VAC | ||||
| protection | overload | Rated output power115%~150% start over load protection | |||
| protection type：hiccup mode，auto-recovery after fault condition is removed | |||||
| environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | |||
| Storagetemp,humidity | -20℃~+85℃，10%~95%RH non-condensing | ||||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes | ||||
| safety | Withstand voltage | I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC | |||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC | ||||
| Fitstandard | Safety standard | Fit UL1012 | |||
| EMC standard | EN55022，CLASSA | ||||
| others | Dimension | 111*78*36mm (L*W*H) | |||
| Weight/packing | 0.26kg/50pcs/ 14kg/0.027 m³/0.96CUFT | ||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | ||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||||
