| Model | MS-15-5 | MS-15-12 | MS-15-15 | MS-15-24 | |
| output | DC voltage | 5V | 12V | 15V | 24V |
| Voltage tolerance | ±2% | ±1% | ±1% | ±1% | |
| Rated current | 3A | 1.3A | 1A | 0.7A | |
| Current range | 0~3A | 0~1.3A | 0~1A | 0~0.7A | |
| Rated power | 15W | 15.6W | 15W | 16.8W | |
| Ripple&noise | 80mvp-p | 120mvp-p | 120mvp-p | 150mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | |
| input | Voltage range | 170~264VAC，235~373VDC | |||
| frequency | 47~63HZ | ||||
| AC current | 0.25A/230VAC | ||||
| efficiency | 76% | 78% | 78% | 80% | |
| Inrush current | Cold start current 30A/230VAC | ||||
| Leakage current | < 0.5mA/240VAC | ||||
| protection | overload | Rated output power115%~150% start over load protection | |||
| protection type ：part layer type current limit ，auto-recovery after fault condition is removed | |||||
| —– | —– | ||||
| —– | |||||
| environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | |||
| Storagetemp,humidity | -20℃~+85℃，10%~95%RH non-condensing | ||||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes | ||||
| safety | Withstand voltage | I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC | |||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC | ||||
| Fitstandard | Safety standard | Fit UL1012 | |||
| EMC standard | 符合EN55022，CLASSA | ||||
| others | Dimension | 84*58*38mm (L*W*H) | |||
| Weight/packing | 0.15kg/80pcs/13kg/0.024m³/0.87CUFT | ||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | ||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||||
