| Model | HSF-10-5 | HSF-10-9 | HSF-10-12 | HSF-10-15 | HSF-10-24 | |
| output | DC voltage | 5V | 9V | 12V | 15V | 24V |
| Voltage tolerance | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Rated current | 2A | 1.1A | 1A | 0.7A | 0.5A | |
| Current range | 0~2A | 0~1.1A | 0~1A | 0~0.7A | 0~0.5A | |
| Rated power | 10W | 9.9W | 12W | 10.5W | 12W | |
| Ripple&noise | 80mvp-p | 120mvp-p | 120mvp-p | 120mvp-p | 120mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | |
| input | Voltage range | 90~264VAC，125~373VDC | ||||
| frequency | 47~63HZ | |||||
| AC current | 0.25A/115VAC，0.15A/230VAC | |||||
| efficiency | 76% | 78% | 79% | 79% | 81% | |
| Inrush current | Cold start current 15A/115VAC，30A/230VAC | |||||
| Leakage current | < 0.25mA/240VAC | |||||
| protection | overload | Rated output power115%~135% start over load protection | ||||
| protection type：hiccup mode，auto-recovery after fault condition is removed | ||||||
| Over voltage | 6.8~8.2V | 12.6~14.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | |
| protection type：hiccup mode，auto-recovery after fault condition is removed | ||||||
| Over temperature | When temperature of transistor inner node is over 150℃, start over temperature protection | |||||
| protection type：hiccup mode，auto-recovery after temperature become normal | ||||||
| environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | ||||
| Storagetemp,humidity | -20℃~+85℃，10%~95%RH non-condensing | |||||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes | |||||
| safety | Withstand voltage | I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC | ||||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC | |||||
| Fitstandard | Safety standard | Fit UL1012 | ||||
| EMC standard | EN55022，CLASSA | |||||
| others | Dimension | 78*48*21mm (L*W*H) | ||||
| Weight/packing | 0.08kg/200pcs/17kg/0.024 m³/0.87CUFT | |||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | |||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||||
HSF-10 compact single switching power supply
HSF-10 compact single switching power supply
·170～264VAC AC input
·Small volume，low weight，high efficiency
·Protections：short circuit/over load
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
