DR-60 Din rail type switching power supply

Model		DR-60-5	DR-60-12	DR-60-24
output	DC voltage	5V	12V	24V
	Voltage tolerance	±2%	±1%	±1%
	Rated current	6.5A	4.5A	2.5A
	Current range	0~6.5A	0~3.5A	0~2.5A
	Rated power	32.5W	54W	60W
	Ripple&noise	100mvp-p	100mvp-p	150mvp-p
	DCvoltage ADJ.range	-9%~+10%	±10%	±10%
input	Voltage range	90~264VAC，127~373VDC
	frequency	47~63HZ
	AC current	1.2A/110VAC，0.65A/220VAC
	efficiency	76%	82%	84%
	Inrush current	Cold start current 25A/115VAC，50A/230VAC
	Leakage current	< 1mA/240VAC
protection	Over load	Rated output power105%~150% start over load protection
		protection type：hiccup mode，auto-recovery after fault condition is removed
	over voltage	6.8~8.2V	15.6~17.8V	30.6~33.2V
		protection type:cut off output voltage,diode clamp
environment	Working temp,humidity	-20℃~+60℃，20%~90%RH
	Storagetemp,humidity	-40℃~+85℃，10%~95%RH non-condensing
	Withstand vibration	10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes
safety	Withstand voltage	I/P-O/P：3KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC
Fitstandard	Safety standard	Fit UL1012
	EMC standard	EN55022，CLASSA
others	Dimension	789356mm (LWH)
	Weight/packing	0.3kg/48pcs/15.4kg/0.03m³/1.07CUFT
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.