The grating micrometer sensor is a precision measuring device use the high precision grating as the detecting element. It could use with in digital display table, become to high precision digital measuring instrument. It could replace mechanical dial gauge, mikrokator, depth gauge, inductance displacement measurement and precision block gauge, with the appropriate converter, which can convert the temperature, pressure, hardness, weight parameters such as digital quantity. It use in online monitoring and the position detection precision instruments of automated mass production. Its advantage is measuring the value of the digital display, high precision, stable and reliable,
accurate readings. It can send data input computer print out the measurement data or curve.
| model | MNGS-R10 MNGS-R20 MNGS-R30 MNGS-R40 MNGS-R50 |
| effective range | 10mm 20mm 30mm 40mm 50mm |
| measurement range | 0~10mm 0~50mm |
| output signal | TTL EIA-422-A |
| Operating Voltage | 5V ±5% |
| resolution ratio | 5um 1um |
| reference mark | One or none |
| protection | IP50 |
| Operating Temperature | 10~40℃ |
uses and install
Grating sensor is mainly used for high precision measurement. When you use it in addition to ensure the environmental conditions, the right to install and sue not only ensures the measurement precision and the service life can also be extended. The correct installation position of grating micro sensor is the rod down or horizontally. There are two installation fixed way: Fixed by screws, the fixing hole center distance for 22±0.2mm. ‚According to with 15 axis clamp. After installation and fixing the center line of rod will perpendicular to be measured with workpiece. When you use it, the measuring head contact surface, digital display table cleared, gently lift rod, when the probe contacts the surface of the workpiece to be measured, digital display value is the measured value. Avoid fast push or quick release rod, so as not to damage the grating or because of the impact of sensor accuracy.
