| Model | SP-75-5 | SP-75-12 | SP-75-15 | SP-75-24 | SP-75-36 | SP-75-48 | |
| Output | DC voltage | 5V | 12V | 15V | 24V | 36V | 48V |
| Voltage tolerance | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | |
| Rated current | 15A | 6.3A | 5A | 3.2A | 2.1A | 1.6A | |
| Current range | 0~15A | 0~6.3A | 0~5A | 0~3.2A | 0~2.1A | 0~1.6A | |
| Rated power | 75W | 75.6W | 75W | 76.8W | 75.6W | 76.8W | |
| Ripple&noise | 80mvp-p | 100mvp-p | 100mvp-p | 120mvp-p | 120mvp-p | 150mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | ±10% | ±10% | |
| Input | Voltage range | 90~264VAC，120~373VDC | |||||
| frequency | 47~63HZ | ||||||
| AC current | 1.6A/115VAC，0.8A/230VAC | ||||||
| efficiency | 79% | 82% | 82% | 82% | 83% | 84% | |
| Inrush current | Cold start current 20A/115VAC，40A/230VAC | ||||||
| Leakage current | < 3.5mA/240VAC | ||||||
| Protection | overload | Rated output power115%~150% start over load protection | |||||
| Protection type：cutoff output，auto recovery after fault condition is removed | |||||||
| Over voltage | 6.8~8.2V | 15.6~17.8V | 18.6~20.8V | 30.6~33.2V | 42.6~44.2V | 54.8~56.6V | |
| Protection type：hiccup mode，auto-recovery after fault condition is removed | |||||||
| —– | —– | ||||||
| —– | |||||||
| Environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | |||||
| Storagetemp,humidity | -20℃~+85℃，10%~95%RH non-condensing | ||||||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes | ||||||
| Safety | Withstand voltage | I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC | |||||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC | ||||||
| Fitstandard | Safety standard | Fit UL1012 | |||||
| EMC standard | EN55022，CLASSA | ||||||
| Others | Dimension | 159*97*38mm (L*W*H) | |||||
| Weight/packing | 0.55kg/45pcs/25.5kg/0.041 m⊃3;/1.45CUFT | ||||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | ||||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | |||||||
SP-75 Single output switching power supply with PFC Function
·Universal AC input/ full range
·Built-in active PFC function, PF>0.93
·100% full load burn-in test
·Protections: Short circuit/ Over load / Over voltage/ Over temperature
·Built-in constant current limiting circuit
·LED indicator for power on
·Remote ON-OFF control (Optional)
·Fixed switching frequency at PF: 67KHz PWM: 134 KHz
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
