|
MODEL
|
SCN-800-12
|
SCN-800-15
|
SCN-800-24
|
SCN-800-48
|
|
| OUTPUT | DC Voltage | 12V | 15V | 24V | 48V |
| Voltage Tolerance | ±1% | ±1% | ±1% | ±1% | |
| Rated Current | 66A | 54A | 33A | 16.6A | |
| Current Range | 0-66A | 0-54A | 0-33A | 0-16.6A | |
| Rated Power | 800W | 800W | 800W | 800W | |
| Ripple & Noise | 150mVp-p | 150mVp-p | 240mVp-p | 480mVp-p | |
| DC Adjustment Range | ±5%; Can adjust from 40%~100% output voltage by external control 2-5V | ||||
| Setup, Rise, Hold Time | 800ms, 50ms, 16ms at full load | ||||
| INPUT | Voltage Range | 90～130VAC / 180～260 VAC47～63 Hz；selected by switch260～370VDC | |||
| AC Current | 13A/115 VAC 8.0A/ 230 VAC | ||||
| Efficiency | 80% | 81% | 85% | 87% | |
| Inrush Current | 60A/230V | ||||
| Leakage Current | 3.5 mA/240VAC | ||||
| PROTECTION | Over Load | 110%～135% | |||
| Protection: Protection:Current limiting, delay shut down o/p voltage, re-power on to recover | |||||
| Over Voltage | 110%~135% | ||||
| Protection type: Shut down o/p voltage, re-power on to recover | |||||
| Over Temp | TSW1(Power transistor) When temp. >100 ℃, shut down o/p voltage, re-power on to recover | ||||
| ENVIRONMENT | Working Temp., Humidity | -10℃～+65℃，20%～90 %RH | |||
| Storage Temp., Humidity | -20℃～+85℃，10%～95 %RH | ||||
| Vibration | 10～200Hz，2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||||
| SAFETY | Withstand Voltage | I/P-O/P, I/P-FG:1500VAC | |||
| Isolation Resistance | I/P-O/P, I/P-FG, >100M Ohms / 500VDC | ||||
| STANDARD | Safety Standard | Design refer to UL1950,CSA22.2,IEC60950 | |||
| EMC Standard | Design refer to FCC Part 15 Class A | ||||
| OTHERS | Weight | 2.3Kg; | |||
| Packing | 8pcs/24.0kg/CARTON | ||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
||||
SCN-800 Single outpu switching power supply
SCN-800 Single outpu switching power supply
· High reliability, low ripple
· AC input range selected by switch
· Protections: Short circuit/ Over load/ Over voltage/ Over temperature
· Built-in remote ON-OFF control and remote sense function
· With parallel function
· Can adjust from 20%~100% output voltage by external control 1-5V
· Forced air cooling by built-in DC fan
รายละเอียดเพิ่มเติม
ข้อมูลเพิ่มเติม
| BRANDS |
|---|
