| Model | MS-25-12 | MS-25-15 | MS-25-24 | |
| output | DC voltage | 12V | 15V | 24V |
| Voltage tolerance | ±1% | ±1% | ±1% | |
| Rated current | 2.1A | 1.7A | 1.1A | |
| Current range | 0~1.3A | 0~1.7A | 0~1.1A | |
| Rated power | 25.2W | 25.5W | 26.4W | |
| Ripple&noise | 100mvp-p | 120mvp-p | 150mvp-p | |
| DCvoltage ADJ.range | ±10% | ±10% | ±10% | |
| input | Voltage range | 170~264VAC，235~373VDC | ||
| frequency | 47~63HZ | |||
| AC current | 0.35A/230VAC | |||
| efficiency | 78% | 78% | 80% | |
| Inrush current | Cold start current 30A/230VAC | |||
| Leakage current | < 0.5mA/240VAC | |||
| protection | overload | Rated output power110%~135% start over load protection | ||
| protection type ：part layer type current limit ，auto-recovery after fault condition is removed | ||||
| environment | Working temp,humidity | -10℃~+60℃，20%~90%RH | ||
| Storagetemp,humidity | -20℃~+85℃，10%~95%RH non-condensing | |||
| Withstand vibration | 10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes | |||
| safety | Withstand voltage | I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC | ||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC | |||
| Fitstandard | Safety standard | Fit UL1012 | ||
| EMC standard | EN55022，CLASSA | |||
| others | Dimension | 84*58*38mm (L*W*H) | ||
| Weight/packing | 0.15kg/80pcs/13kg/0.024m³/0.87CUFT | |||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. | |||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||||
| 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||
