| MODEL | S-150-5 | S-150-12 | S-150-15 | S-150-24 | S-150-36 | S-150-48 |
| DC VOLTAGE | 5V | 12V | 15V | 24V | 36V | 48V |
| CURRENT RANGE | 0 ~ 30A | 0 ~ 12.5A | 0 ~ 10A | 0 ~ 6.5A | 0~4.17A | 0~3.13A |
| EFFICIENCY | 78% | 82% | 84% | 85% | 86% | 87% |
| WAVE & NOISE | 150mVp-p | 180mVp-p | 180mVp-p | 240mVp-p | 240mVp-p | 240mVp-p |
| ADJUSTABLE RANGE FOR DC VOLTAGE | ±10% | ±10% | ±10% | ±10% | ±10% | ±10% |
| LINE REGULATION | ±0.5% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
| LOAD REGULATION | ±0.8% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
| SETUP, RISE HOLD UP TIME | 100ms, 50ms,20ms/230VAC at full load | |||||
| VOLTAGE RANGE | 90 ~ 132VAC/180-264VAC by switch 254 ~ 370VDC | |||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||
| IMPACT CURRENT | Cold start current 35A/230VAC | |||||
| WORKING TEMP. | -10 ~ +50ºC | |||||
| OVERLOAD PROTECTION | 105%-150% cut off the output , automatic recovery | |||||
| OVER VOLTAGE PROTECTION | 105%-150% shunt down O/P voltage,re-power on to recover | |||||
| WITHSTAND VOLTAGE | I/P-O/P:1.5KV I/P-FG:1.5KV O/P-FG:0.5KV 1minute | |||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:500VDC/100M Ohms | |||||
| DIMENSION | 199*110*50mm (L*W*H) | |||||
| WERIGHT | 0.85kg | |||||
| PACKING | 43*31.5*26cm/20pcs/17Kg | |||||
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25oCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meetsEMC dir |
||||||
